Faceplate for 2.5-Inch Digital Clock/Speaker Assembly, V-CSB25
The V-CSB25 is a part of Valcom’s speaker clock assembly units that provide an architecturally pleasing solution for recessed, surface or angle mounted systems. The speaker clock assembly is easy to install and requires only one ethernet port connection. Choose an 8-inch speaker, clock, faceplate, and backbox that best suits your need to ensure an attractive and effective solution for any environment. The speaker clock assembly is ideal for classrooms, offices, meeting rooms, gymnasiums, warehouses and hallways.
- 2.5-Inch digital clock mounts behind faceplate
- Holds a standard 8-Inch speaker
- Recessed or surface mount
Four Channel In-Wall Audio Mixer with Remote, V-9985-W
Valcom's V-9985-W Four Channel In-Wall Mixer is a cost-effective solution that eliminates the use of expensive in-wall amplifiers. The complete sound system is ideal for conference rooms, lecture halls, restaurants, auditoriums and gymnasiums.
- Built-in compressor (Option Switch Controlled) for automatic consistent volume level adjustment even when voices vary - low to high
- Master volume control for optimum volume adjustments & volume control for each input
- One general building page input (-10dBM) overrides all other inputs
- Drives 50 amplified speakers and/or horns
- 8 Segment LED meter for visual indication of Audio Signal Levels
- Full frequency range output for speakers
- Hi Pass output for horns
Impedance Matching Module, V-LPT
One-Way Paging Adapter
The V-LPT Impedance Matching Module or One-Way Paging Adapter is a device designed to convert the hands-free talkback audio outputs to the appropriate level and impedance necessary for the input of one-way amplifiers and/or Valcom One-Way Self-Amplified Speakers or Horns.
- The V-LPT is an impedance matching module for driving amplified speakers.
- Connection to the audio input and output is made to screw terminals on the unit.
- Converts 45ohm talkback speaker outputs to the audio level and impedance required by
Valcom Self-Amplified Speakers, Horns or other line level amplifier inputs. - Volume is adjusted by turning the level pot on the unit.
Impedance Matching Transformer, VMT-1
Valcom's Input/Line Transformer is designed to match inputs from or outputs to a 600-ohm line. Used as an input-matching transformer, it connects telephone systems to most public address amplifiers that are used for telephone paging.
- Connects system to most public address amps for phone paging
- Functions as output-matching transformer to feed program material over a 600-ohm telephone line for “music-on-hold”
- Compatible with any 25V output connection amplifier
- Hi-Z, 10k-ohm primary impedance
- Lo-Z, 600-ohm secondary impedance, balanced with center tap
- Matches high-to-low impedance or low-to-high impedance
- Adapts line level signals to microphone inputs
In-Wall Audio Mixer Remote Module, V-9984-W
Valcom's V-9984-W, In-Wall Audio Mixer Remote Module, is a cost-effective solution that eliminates the use of expensive in-wall amplifiers. The complete sound system is ideal for conference rooms, lecture halls, restaurants, auditoriums and gymnasiums.
- Provides 1 balanced XLR microphone input & 1 auxiliary input for MP3 Players, CD, DVD or PC's
- Connects to main control module, w/2 Pair 24 AWG Cable
- Volume control for each input
- Power “ON” indicator
- Phantom power (Switch Controlled) with “ON” indicator allows use of consumer microphone
Loud Warbler Ringer Horn, V-9945A
Valcom's V-9945A Loud Warble Ringer Horn is a two-tone horn designed to broadcast tones throughout your organization to notification individuals of shift changes, breaks or other important announcements. The V-9945A broadcasts a loud warble as long as an input signal is present and have the ability for night rings for after normal business hours. The V-9945A is a two-tone ringer horn that provides amplified electronic tones for signaling in large, noisy or outside areas.
- Interrupted or uninterrupted contact closure activation
- Built-in tone generator, speaker and volume control
- Warble tone - night ring
- Single tone - time clock/doorbell/alarm
- Single tone overrides warble tone if activate simultaneously
- Beige
- Indoor/outdoor use
Message-On-Hold USB, V-9988
Valcom's V-9988 Message-On-Hold USB device eliminates time limitations and provides an infinite opportunity for continuous background music or messages. The digital message on hold systems supports the MP3 playback without any special drivers or software.
- Continuous playback of music and/or messages
- Supports flash drives up to 4GB
- High quality audio playback up to 128Kbps
- Built-in monitor speaker
- LED status indicator
- USB flash drive include
- Free generic on-hold message
- Free personalized on-hold message
- Pre-recorded audio file included
Metal Backbox, for Ceiling Speakers, S-551-5
Clarity S-551-5 Ceiling Speaker Backbox
S-551-5 Ceiling Speaker Backbox prevents debris and insulation from coming into contact with the speaker. The sturdy steel construction of this backbox allows it to be used in plenum return ceilings. In open ceiling structures, the backbox may be used as an enclosure for a speaker by attaching the backbox directly to the beam and mounting a speaker to the backbox with the hardware provided. Packaged 5 per box.
- Sturdy steel construction with five knockouts
- Fire retardant damping material
- Used in plenum return ceilings
Microphone Adapter, V-9939C
Valcom's V-9939C Microphone Adapter connects Valcom's dynamic microphones to our paging systems. The V-9939C works with most microphones with push-to-talk switches.
- Provides contact closure
- Built-in microphone preamplifier
- Mounts at microphone location
- Provides a set of form "C" contacts
- May be connected to a selected zone of a multi-zone paging system
- Connector terminals for all connections
- 600 Ohms balanced and 50,000 Ohms inputs works with most microphones with push-to-talk switches
Mount Ring for 12-Inch Analog Clock, Wired, V-SMR12A
Valcom's clock surface mount option makes it easy for retrofit applications.
- Surface Mount Housing: The housings are intended for wired round analog clock retrofit applications where in-wall cabling is impractical.