Secondary Category: Paging Expansion

Dual Enhanced Network Station, Dual FXS Port, Rack Mount, VE8012BR

The VE8012BR Dual Enhanced Network Station Port allows most loop start terminal devices to be connected to a managed IP-based LAN/WAN.


• RJ-45 for network connection
• 2 RJ-11 telephone connections
• 4 relays with Form C contacts
• Front panel activity LED
• Network activity LEDs
• 2 REN
• 2.5mm jack for DC
• Power over Ethernet (PoE) 802.3af compliant
• Provides caller ID information
• No server required
• 1-To-11-digit dial plans
• Easy windows-based setup
• Contact closures available for:
-audio indication
-ringing indication
-door unlocking

Quad Enhanced Network Station, Quad FXS Port, VE8014B

The VE8014B Quad Enhanced Network Station Port allows most loop start terminal devices to be connected to a managed IP-based LAN/WAN.

• RJ-45 for network connection
• 4 RJ-11 telephone connections
• 4 relays with Form C contacts
• Generates caller ID signals
• Front panel activity LED
• Network activity LEDs
• 4 REN
• 2.5mm jack for DC
• Power over Ethernet (PoE) 802.3af compliant
• Provides caller ID information
• No server required
• 1-to-11-digit dial plans
• Easy windows-based setup

Enhanced Network Station Port Single FXS Port, VE8011AR

The VE8011AR Enhanced Network Station Port enables one (1) telephone to engage in paging and phone to phone communications over an IP-based LAN/WAN.

• RJ-45 for network connection
• 1 RJ-11 telephone connections
• 2 relays with Form C contacts
• Front panel activity LED
• Network activity LEDs
• 2 REN
• 2.5mm jack for DC
• Power over Ethernet (PoE) 802.3af compliant
• 1 FXS port
• Provides caller ID information
• No server required
• 1 to 11 digit dial plans
• Easy windows based setup
• Contact closures available for:
-audio indication
-ringing indication
-door unlocking

Network Page Zone Extender, Single Audio Port, VE8001A

The VE8001A Network Page Zone Extender enables voice access to two zones of one-way paging over an IP based LAN/WAN. This allows page zone extension anywhere on the network. Multiple VE8001A Network Page Zone Extenders can be used on the same network to create very large and distributed public address systems. Example applications include multiple floors in a single building, multiple buildings in a campus environment, city wide paging of all fire and rescue buildings, interstate paging between bank branches. 

• 1 audio outputs
• 1 audio inputs
• 2 Form C relay contacts
• 1 contact closure inputs
• RJ-45 for network connection
• Front panel activity led
• Aux audio input via RCA jack
• Contact closure or VOX operation of audio input
• SIP compatible
• Provides audio for up to 40 Valcom one-way amplified speaker assemblies
• Removable screw terminal connector
• Provided for audio and relay interface
• Page with music output, music mutes during page
• Output control contact closure provided during paging output
• Compatible with 25 or 70 Volt amplifiers
• 2.5mm jack for DC power
• Power over Ethernet (PoE) 802.3af compliant
• No server required
• 1-To-11-digit dial plans
• Easy windows based setup

Impedance Matching Transformer, VMT-1

Valcom’s Input/Line Transformer is designed to match inputs from or outputs to a 600-ohm line. Used as an input-matching transformer, it connects telephone systems to most public address amplifiers that are used for telephone paging.

  • Connects system to most public address amps for phone paging
  • Functions as output-matching transformer to feed program material over a 600-ohm telephone line for “music-on-hold”
  • Compatible with any 25V output connection amplifier
  • Hi-Z, 10k-ohm primary impedance
  • Lo-Z, 600-ohm secondary impedance, balanced with center tap
  • Matches high-to-low impedance or low-to-high impedance
  • Adapts line level signals to microphone inputs

Audio Isolation Transformer, VMT-2

Valcom’s Audio Isolation Transformer may be used for magnetically coupling line level audio. Common uses include isolating ground references from one audio circuit to another.

  • Magnetically Coupling Line Level Audio
  • Isolating Ground References From One Audio Circuit to Another

70V Paging Expander, V-1095

Valcom’s V-1095 70V Paging Expander allows you to expand a centrally amplified system using Valcom one-way speaker/amplifier assemblies. The V-1095 is made with a stainless-steel plate with embossed numbers and fits a single gang electrical wall box. With the V-1095 you can easily expand your 25/70/100V paging system without adding additional amplifiers.

  • Easily connects to the amplifier output or anywhere on the 25/70/100 Volt or 8 Ohm/4 Ohm line
  • No costly amplifiers or heavy gauge cable required
  • Endless expansion using Valcom speakers or horns